Skip to main content

2. Register with Skatteverket

Updated over 3 weeks ago

Onboarding steps:


Register your cash register with Skatteverket

All cash registers must be registered with Skatteverket. Follow these steps:

  1. Select "Anmäl, ändra, felanmäl och avanmäla kassaregister"

  2. Log in using BankID, Freja ID, or AB Svenska Pass

Next step is to register the Control Unit (Kontrollenhet).

Begin by registering the control unit. This is a required first step before you can register your cash register with Skatteverket.

Important: You must use these exact details

  • All cash registers must be connected to a certified control unit. We provide a connection to TCS (InfraSec's) cloud-based control unit.

Copy these exact details into the Skatteverket form—do not modify or substitute any information:

  • Manufacturer (Tillverkare): TCS

  • Model (Modell): TCS Modell System Ver 1.1 + Miljö rev A

  • Serial number (Tillverkningsnummer): ISTCSKS0000000011

  • Control unit's address (Kontrollenhetens adress):

    • Name (Namn): Bahnhof

    • Postal number (Postnummer): 111 37

    • Address (Adress): Tunnelgatan 2

    • City (Postort): Stockholm

Above pre-configured details connect you to our certified control unit infrastructure.

Next step is to register your Cash Register.

Before moving forward, review all the control unit information you entered above to ensure it's correct. Once verified, proceed to register your cash register with Skatteverket in the next step.

Next, fill in the form with the information below.

Some details are fixed values provided by Kustom (our certified system), while others are specific to your business and the cash register (scroll down to see pictures).

  • Control unit (Kontrollenhet): Click to select the control unit you registered in the previous step.

  • Cash register (Kassaregister):

    • Designation (Beteckning): Select “Kustom POS SE”.

    • Modell/program (Model/software): Select “1.x”.

    • Manufacturer number (Tillverkningsnummer): Input the unique ID seen on your cash register in the Kustom Portal by clicking the cash register and opening the drawer, manufacturer ID ex: “KUXXXXXXXXXXXXX”

Important: The Manufacturer number (Tillverkningsnummer) is unique. Make sure to copy the exact Manufacturer ID shown in your Kustom Portal for this specific cash register by clicking it and opening the drawer.

Important: The information below is unique to your business. Fill in your unique business details here.

  • Cash register’s address (Kassaregistrets adress):

    • Name (Namn): Name of your business

    • Postnummer (postal code): Postal code of your business or store

    • Street (Gata): Street address of your business

    • Street number (Nummer): Street number of your business

    • City (Postort): The city or post town where your business is located

  • Software’s address (Programvarans adress): Do not click the checkbox to use the same address as the cash register but input the below

    • Name (Namn): Kustom AB

    • Postal (Postnummer): 11437

    • Address (Gata): Brahegatan

    • Number (Nummer): 10

    • City (Postort): STOCKHOLM

  • Audit strip or journal memory (Kontrollremsa eller journalminne): Click to select Journalminne (Journal memory).

  • Address where journal memory is generated (Adress där journalen skapas): Do not click the checkbox to use the same address as the cash register but input the below

    • Name (Namn): Kustom AB

    • Postal (Postnummer): 11437

    • Address (Gata): Brahegatan

    • Number (Nummer): 10

    • City (Postort): STOCKHOLM

If you plan to use multiple devices and MPOS apps simultaneously, we recommend creating and registering a separate cash register for each one. Once registration is complete, you'll receive confirmation from Skatteverket within 2 weeks—but you can start selling with MPOS right away.

Note: In the form at Skatteverket, do NOT click in “Samma adress som kassaregistret”. Since the journal memory and cash register is cloud based (digital) the correct address is Kustom which is the manufacturer of that software and not a physical device/hardware.

Did this answer your question?